¶ Lab 4: Nuclear Science
¶ Materials
- Basic GM System (Absorber Set Lead Only)
- Calibration Source Set (Co-60)
- Material # 6, 8, 9, 10, 11
¶ Cart?
No cart needed.
¶ Photo of Completed Lab Set-Up
¶ Instructions
- Place a Basic GM System onto each lab station.
- The material #6, 8, 9,10, 11 should already be in the little cubby in the Basic GM System.
¶ Basic GM System with Necessary Material
3. Place the box containing the Co-60 calibration set into the middle drawer in the small, black filing cabinet in the back right corner of the lab room (by the computer). To open the cabinet, put the code into the lock and squeeze the lock (see arrows below). Then, lift the small black tab up and you should be able to open the cabinet.
¶ Black Filing Cabinet
4. Place the clipboard with the sign out sheets onto the table next to the filing cabinet. TA’s need to sign in and out before and after their lab sections for the Co-60 Calibration Set.
¶ Clipboard Next to Filing Cabinet
¶ Spares
- Power Supply
¶ Link to Lab Instructions
Last Updated: 4/19/23